Summer on the Sapphire Coast means caravans, camper trailers and boats heading for the beach — and the Bega Valley sits right on the route. Towing is one of the toughest jobs you’ll ask of your vehicle, so a bit of prep before the first trip keeps everyone safe and saves you a roadside headache in the holiday heat.

To get your car ready for towing, work through the essentials: check your brakes, tyres and cooling system, confirm your towbar and wiring are sound, and make sure you’re within your vehicle’s towing and weight limits. This checklist walks through each one so your rig is genuinely summer-ready, not just hitched up and hoping.

Start with the numbers: weights and limits

Before anything else, know your limits. Every vehicle has a maximum towing capacity and a maximum towball weight, and your caravan or trailer has its own weight ratings. Staying within them isn’t optional — it’s about safety and staying legal.

  • Towing capacity: The maximum weight your vehicle is rated to tow. Check your handbook or compliance plate.
  • Towball download: The weight the trailer puts on the towball — too much or too little affects stability.
  • GVM and GCM: Your vehicle’s maximum loaded weight, and the combined limit for vehicle plus trailer. Load within both.

If you’re not sure how your setup stacks up, it’s worth weighing your loaded rig. Getting the weights and balance right is the single biggest thing you can do for safe towing.

The pre-trip mechanical checklist

  • Brakes: Towing puts far more load on your brakes. Check your pads and, if your trailer has electric brakes, test the controller and connection before you leave.
  • Tyres: Check condition and pressures on both the vehicle and the trailer — including the spares. Towing often calls for higher pressures, so check the placard.
  • Cooling system: Hauling weight in summer heat works your engine hard. Make sure your coolant is full, fresh and leak-free before a long climb.
  • Engine oil: Clean oil at the right level matters more under towing load. Check it, and change it if it’s due.
  • Lights and wiring: Test every trailer light — brake, indicators, tail and number plate — and check the plug and wiring for corrosion or damage.

Towbar, hitch and safety gear

Your connection to the trailer has to be right every time. Check the towbar and tongue are secure and rust-free, the coupling latches properly onto the ball, and the safety chains are rated and correctly crossed. Fit and check your mirrors so you can see down both sides of the van, and pack a basic kit — a rated jack, wheel brace, spare, and the tools to change a trailer tyre on the roadside.

Load it right

How you pack matters as much as how much you pack. Keep heavy items low and over the trailer’s axle, not at the back, and don’t overload the rear — too much weight behind the axle causes dangerous sway. Distribute weight evenly side to side, and make sure everything is tied down so it can’t shift on the highway. A well-balanced van tows straight and calm; a badly loaded one fights you the whole way.

Trailer brakes, mirrors and staying legal

Beyond the mechanical checklist, a couple of things keep you legal and safe on the road. Once a caravan or trailer passes a certain loaded weight, it must have its own brakes — and if it runs electric brakes, your vehicle needs a working brake controller set up correctly. Test it before you leave, not on the first steep hill.

Towing mirrors are the other easy thing to overlook. If your van or trailer is wider than your vehicle, the law requires mirrors that let you see clearly down both sides. Fit and adjust them before you set off — you’ll tow more safely and avoid a fine.

  • Check your brake controller: Make sure it’s connected and adjusted for the load before each trip.
  • Fit proper towing mirrors: Required whenever the trailer blocks your normal view down the sides.
  • Re-test lights and connections: Trailer plugs cop dust and corrosion, so a quick test avoids a dark, illegal rig.

None of this takes long, and it’s the difference between a relaxed getaway and a roadside problem in the summer heat.

Frequently asked questions

How do I know my car’s towing capacity?

Your towing capacity is listed in your owner’s manual and often on the vehicle’s compliance plate. Never exceed it, and remember your combined loaded weight (vehicle plus trailer) also has to stay within the GCM limit.

What should I check before towing a caravan?

Check your brakes, tyres (including spares), cooling system and oil, then confirm the towbar, coupling, safety chains and all trailer lights are sound. Finally, make sure you’re within your weight limits and the load is balanced over the axle.

Why does my caravan sway when towing?

Sway is usually caused by too much weight behind the trailer’s axle, uneven loading or incorrect towball weight. Load heavy items low and over the axle, balance the load side to side, and check your towball download is in the right range.

Does my trailer need its own brakes?

It depends on weight. Lighter trailers may not need brakes, but once a trailer passes a certain loaded weight, brakes become a legal requirement — and heavier ones need a breakaway system too. Check the rules for your trailer’s weight before towing.

What’s the difference between GVM and GCM?

GVM (Gross Vehicle Mass) is the most your vehicle can weigh when fully loaded on its own. GCM (Gross Combination Mass) is the most your vehicle and trailer can weigh together, fully loaded. When you’re towing, you need to stay under both — going over either is unsafe and illegal.

Get in touch

Getting your rig ready for a summer getaway? The parts interpreters at Parts4 Bega can help with towbar parts, wiring, couplings and more — call (02) 6492 5212 or visit 115 Gipps Street, Bega. And if you need parts delivered around the valley, our Red Rocket Express Courier can bring them to you.